Exterior field guide
Why exterior paint peels in Kelowna
Before choosing a new coating, trace where the old one failed. The location, the condition of the surface and the layers that came off can help a painter narrow down the cause.

Start with where it peels
| Pattern | What to investigate |
|---|---|
| Below a sill or gutter | Look for leaking joints, drainage faults or water entering from above. Staining and swollen or soft wood deserve inspection. |
| Only on a recent repaint | Check the old finish and the new coating’s bond. Dirt, chalk, gloss, inadequate preparation or application conditions may matter. |
| At board ends and joints | Examine exposed wood and repeated wetting. Resolve failed joints or water exposure before refinishing. |
| Broad areas on exposed elevations | Check coating age, substrate condition, sunlight exposure and whether earlier layers are still sound. |
Repair recurring wetting first
Gutters, roof or wall joints, sprinklers and moisture moving through an assembly can all play a role. Where the area stays damp or the wood is soft, arrange the appropriate repair before painting. Window trim often shows early signs around vulnerable edges.
Check which layer lost adhesion
Look at the underside of a loose flake. Exposed wood or another paint layer can help a professional identify where the system failed. Let the site and the product requirements guide prep, priming and the next coating.
Document the area before requesting a quote
Photograph the whole elevation and close-ups of the edges. Note when the peeling began, past products if known and any water or weather patterns. Ask what will be corrected, how sound edges will be prepared and which primer and finish are specified.
See our Kelowna exterior painting scope and exterior maintenance checklist for the next steps.
Speak with Harris
Share the areas that are peeling
Include the approximate height, siding or trim material, recent work and signs of recurring wetting.
